Home   >   Request Quote

Request Quote

Instrument

AccuPyc II 1340

Micromeritics new AccuPyc 1340 Series Pycnometers are versatile, fast, fully automatic analyzers that provide high-speed, high-precision volume measurements and density calculations on a wide variety of powders, solids, and slurries





How to request a quote:

  1. Enter the desired quantity in the Qty. box, directly adjacent to the item you are requesting information for.
  2. Click on the Add to Quote Request link at the bottom of the item listings page.
  3. You can review your quote request by clicking on the Review Quote Request link.
  4. Once you finalize the items you are requesting information for, click on the Request Quote link
  5. Registered users should login to submit their quote request.
  6. New users will be required to fill out a short form to register. Please click on the Register link on the right side of your screen
Part No. 134-00000-00
AccuPyc 1340,
10 cm3 capacity
Qty:

Part No. 134-00001-00
AccuPyc 1340,
1 cm3 capacity
Qty:

Part No. 134-00002-00
AccuPyc 1340,
100 cm3 capacity
Qty:

Part No. 134-00010-00
AccuPyc 1340TC,
10 cm3 capacity
Qty:

Part No. 134-00020-00
AccuPyc 1340TC,
100 cm3 capacity
Qty:

Part No. 134-00030-00
AccuPyc 1340 Glove Box,
10 cm3 capacity
Qty:

Part No. 134-00031-00
AccuPyc 1340 Glove Box,
1 cm3 capacity
Qty:

Part No. 134-00032-00
AccuPyc 1340 Glove Box,
100 cm3 capacity
Qty:

Part No. 134-00033-00
1340 Glove Box,
350 cm3 capacity
Qty:

Part No. 134-00034-00
AccuPyc II 1340, Glove Box 2000-cm3 capacity
Qty:

Part No. 134-00050-00
AccuPyc II TEC - 10 cm³
Qty:

Part No. 134-00051-00
AccuPyc II TEC - 100 cm³
Qty:

Part No. 134-00044-00
AccuPyc II TC - 10 cm³
Analysis Module, a Chiller-Dewar is required
Qty:

Part No. 134-00045-00
AccuPyc II TC - 100 cm³
Analysis Module, a Chiller-Dewar is required
Qty:

Part No. 134-20808-00, Asphalt Software

AccuPyc II 1340 Asphalt Software
The 1340 Asphalt Software solution can be closely correlated (>0.15% difference) to results obtained with ASTM Test Method D70-09, and offers an expedited, more robust, operator independent method, with results in minutes.

  • Reproducible results in minutes, virtually eliminating operator error 
  • Integral-solution with software for bituminous material testing includes results for specific gravity, volume, and density
  • Peltier thermoelectric control of AccuPyc II 1340 TEC (Item #1) provides excellent temperature control/stability and sample handling
  • Disposable sample cups (Item #12) limit cross contamination and minimize cleaning of sample chamber between analyses
Qty:

Accessories

Control Module


 Control Module - no sample compartment
Part No. 134-00005-00
Control Module, no sample compartment
Qty:

Analysis Module


Part No. 134-00040-00
Analysis module,
10 cm3 capacity
Qty:
Part No. 134-00041-00
Analysis module,
1 cm3 capacity,
Qty:
Part No. 134-00042-00
Analysis module,
100 cm3 capacity
Qty:
Part No. 134-00043-00
Analysis module,
350 cm3 capacity
Qty:
Part No. 134-00044-00
Analysis module,
temperature control,
10 cm3 capacity
Qty:
Part No. 134-00045-00
Analysis module,
temperature control,
100 cm3 capacity
Qty:
Part No. 134-00046-00
Analysis Module, 2000-cm3 capacity
Qty:

Sample cup

Part No. 133-25805-00
Sample cup, 10-cm3 capacity
Qty:
Part No. 133-25845-00
Sample cup, 100-cm3 capacity
Qty:
Part No. 133-25848-01
Sample cup, 350-cm3 capacity
Qty:
Part No. 135-25805-00
Sample cup, 3.5cc capacity (used with 10cc multivolume kit)
Qty:
Part No. 135-25804-00
Sample cup, 35cc capacity (used with 100cc multivolume kit)
Qty:
Part No. 134-25874-00
Sample cup, 2000-cm3 capacity
Qty:
Part No. 134-25875-00
Sample cup, 1300 cm3 capacity (used with CorePyc multivolume Kit)
Qty:
Part No. 134-25876-00

Sample cup, 650 cm3 capacity (used with CorePyc multivolume Kit)

 

Qty:
Part No. 133-25805-02
Sample cup, 10-cm3 capacity, stainless steel
Qty:
Part No. 134-25600-00, Cup, sample 3.3cc
Cup, sample 3.3cc alum disposable, pack of 50
Qty:
Part No. 134-33007-00, Disposable sample cup kit for 10cc
Disposable sample cup kit for 10cc AccuPyc - Consists of:
  • Wooden case
  • 3.3cc insert for 10cc AccuPyc
  • Calibration ball standard 15mm
  • Calibration certificate
  • 50 aluminum cups 3.3c
Qty:

Filtered Cup

used to constrain powdered samples

Part No. 133-25862-00
Filtered cup assembly, 10 cm3
Qty:
Part No. 133-25863-00
Filtered cup assembly, 100 cm3
Qty:

Chamber cap O-ring

A 19mm wide USA penny is shown as a size reference

Part No. 004-25575-00
Chamber cap O-ring, 10 cm3
Qty:
Part No. 004-25637-00
 Chamber cap O-ring, 1 cm3
Qty:
Part No. 004-25577-00
Chamber cap O-ring, 100 cm3
Qty:
Part No. 004-25689-00
Chamber cap O-ring, 350 cm3
Qty:
Part No. 004-25032-00
Chamber cap O-ring, 2000-cm3
Qty:

Calibration Standard Kit

Part No. 133-34900-00
Operational Calibration Standard Kit, 10-cm3; contains two operational calibration standards and one sample cup
Qty:
Part No. 133-34901-00
Operational Calibration Standard Kit,
1-cm3;
contains one perational calibration standard and one sample cup
Qty:
Part No. 133-34902-00
Operational Calibration Standard Kit, 100-cm3;
contains one operational calibration standard and
one 100-cm3 sample cup
Qty:
Part No. 133-34903-00
Operational Calibration Standard Kit, 350-cm3;
contains three operational calibration standards
and one sample cup
Qty:
Part No. 134-34901-00
Operational Calibration Standard Kit, 2000-cm3; contains one operational calibration standard and one 2000-cm3 sample cup
Qty:

Reducer

Part No. 004-25549-00
Reducer, 1/8-in. tube x 1/4-in. tube
Qty:

Gas inlet line assembly


Part No. 290-25846-00
Copper Gas inlet line assembly, 6 ft
Qty:
Part No. 290-25846-01
Gas inlet line, Copper 5m (16 ft)
Qty:
Part No. 201-25818-01
Gas Inlet Line, Stainless Steel, 5m (16 ft)
Qty:

High Vacuum Grease

Part No. 008-16045-00
High Vacuum grease, Dow Corning
Qty:

Multi Volume Kit


Part No. 133-33604-00
AccuPyc 1340 MultiVolume Kit,
for 100-cm3 pycnometer; includes 10- and 35-cm3 inserts and appropriate sample cups
Qty:
Part No. 133-33605-00
AccuPyc 1340 MultiVolume Kit,
for 10-cm3 pycnometer; includes 1- and 3.5-cm3 inserts and appropriate sample cups
Qty:
Part No. 134-33006-00
AccuPyc 1340 MultiVolume Kit,
for 1-cm3 pycnometer; includes a 0.1-cm3 insert/sample cup combination
Qty:
Part No. 134-33605-00
Multivolume Kit, for 2000-cm3 pycnometer; includes a 650-cm3 and 1300-cm3 cups, inserts and reference standards
Qty:

AccyPyc II 1340 Operator's Manual


Part No. 134-33005-00
FoamPyc Option, for analysis of rigid foam materials; includes software and operator's manual, Windows
Qty:
Part No. 134-42804-00
Operator's Manual; FoamPyc Option, Windows
Qty:
Part No. 134-33003-00
FoamPyc Option, of analysis of rigid foam materials; includes software and operator's manual. Stand alone option
Qty:
Part No. 134-42801-00
Operator's manual; stand alone
Qty:
Part No. 134-42803-00
Operator's manual, FoamPyc option, stand alone
Qty:
Part No. 134-42800-00
Operator’s manual, for AccuPyc II 1340 Windows application
Qty:

Analytical Methods in Fine Particle Technology


Part No. 008-42001-00
This book has been prepared to serve those just entering this field of technology as well as experienced researchers seeking insight into particular problems and guidance in achieving the tmost from their testing and research.
Qty:

Handling Tool


Part No. 133-09810-00
This tool is used with the 1cc sample chamber, it lifts the sample cup out of the sample chamber.
Qty:

Sample Cup Insert

Part No. 133-25855-01, 0.1-cm3 sample capacity
Qty:
Part No. 133-09601-00, Tool for handling 0.1-cm3 cup insert
Qty:

FoamPyc Sample Preparation Kit

Part No. 133-33009-00
AccuPyc 1330 and 1340;
FoamPyc Sample Preparation Kit;
Case, Mitre Box, Knife Assembly and 3 Blades
Qty:

Poster


Part No. 134-42901-00
Poster; Volume and Density of Materials 24" x 36"
Qty:

Multigas Option Manifold

The Multigas option consists of the following:

  • valve assembly and two retaining screws
  • gas entrance tubing for connection from the analyzer to the valve assembly
  • gas supply tubing for four gases
Part No. 134-33020-00
Multigas Manifold; enables you to connect multiple gases to the analysis unit, includes hardware and installation instructions.
Qty:

Cables

Part No. 003-40054-00
AC/DC power supply, external
Qty:
Part No. 003-60101-00
Power cord
Qty:
Part No. 003-60623-00
Cable, 2 ft, for connecting analysis modules
NOT SHOWN
Qty:
Part No. 003-63801-00
Ethernet cable
Qty:
Part No. 003-60623-01
Cable, 25 ft, for connecting Control Module to Glove box unit
Qty:
Part No. 003-60101-05
Power cord, Schuko for European countries
Qty:

Gas Regulator

Part No. 004-62230-58
Gas regulator, 30 psig, CGA 580
Qty:
Part No. 004-33601-00
Expansion Kit; two outlets, includes fittings and instructions.
Qty:
Part No. 004-33602-00
Pressure Relief Kit; prevents excessive gas pressure in the event of regulator failure. Not to be used with noxious gasses.
Qty:

Fitting Hose Barb

1/4 in. (0.64), set of 2; for bath circulator connectors on temperature-controlled units.
Part No. 004-25681-01
Qty:

Power Adapter

Power adapter
Part No. 134-34007-00
Qty:

Disposable Sample Cup Kit

Note: The actual cups are unthreaded, smooth sided cups.
New photo coming soon

Disposable sample cup kit for 10cc AccuPyc - Consists of:

  • Wooden case
  • 3.3cc insert for 10cc AccuPyc
  • Operational Calibration ball standard 15mm
  • Operational Calibration certificate
  • 50 aluminum cups 3.3cc 
Part No. 134-33007-00

 

 

 

Qty:
Part No. 134-25600-00, Cup, sample, 3.3cc
aluminum disposable, pack of 50
Qty:

Filtered Cup Assemby Components

100 cm³ Filtered Cup Assembly Components (133-25863-00)
Part No. 004-25299-00
O-ring, -024 70 Duro Buna-N
Qty:
Part No. 004-27055-00
Paper Filter (pack of 100)
Qty:
Part No. 133-25845-01
Modified 100cc Sample Cup
Qty:
Part No. 133-25901-00
100cc Sample Cup Filter Cap
Qty:
Part No. 133-25902-00
Spring Clip for 100cc Sample Cap
Qty:

Dust Filter for 2000 cm 3 version

Part No. 004-25006-00
O-ring, -006 70 DURO BUNA-N
Qty:
Part No. 004-25011-00
O-ring, -006 70 DURO BUNA-N
Qty:
Part No. 004-25312-00
Compression Spring
Qty:
Part No. 004-27082-00
Filter, Line 10 Micron
Qty:

KIT, 100 cm³ FILTERED CAP, 2 µm

KIT, 100 cm³ FILTERED CAP, 2 µm

(Kit supplied with 5 (ea.) of Item 1, and 1 (ea.) of Items 2 and 3.)

Item 1) O-RING, -030 70 DURO BUNA-N

Item 2) CUP, SAMPLE 100 cm³ MODIFIED

Item 3) CAP, FILTERED, 100 cm³, 2 µm

Part No. 134-33011-00

 

Qty:

KIT, 10 cm³ FILTERED CAP, 0.5 µm

KIT, 10 cm³ FILTERED CAP, 0.5 µm

(Kit supplied with 5 (ea.) of Item 1, and 1 (ea.) of Items 2 and 3.)

Item 1) O-RING, BUNA-N, 14mm ID x 1mm WIDE

Item 2) CUP, SAMPLE 10 cm³ MODIFIED

Item 3) CAP, FILTERED, 10 cm³, 0.5 µm

Part No. 134-33012-00
Qty:

KIT, 35cm³ FILTERED CAP, 2 µm

KIT, 35cm³ FILTERED CAP, 2 µm

(Kit supplied with 5 (ea.) of Item 1, and 1 (ea.) of Items 2, 3, and 4.)

Item 1) O-RING, -022, 70 BUNA N

Item 2) 35 cm³ INSERT MULTIVOL., 100 cm³ FILTER CAP

Item 3) CAP, FILTERED, 100 cm³, 2 µm

Item 4) CUP, SAMPLE, 35 cm³

Part No. 134-33014-00

 

Qty:

KIT, 10 cm³ FILTERED CAP, 10 µm

KIT, 10 cm³ FILTERED CAP, 10 µm

(Kit supplied with 5 (ea.) of Item 1, and 1 (ea.) of Items 2 and 3.)

Item 1)O-RING, BUNA-N, 14mm ID x 1mm WIDE

Item 2) CUP, SAMPLE 10 cm³ MODIFIED

Item 3) CAP, FILTERED, 10 cm³, 10 µm

Part No. 134-33013-00
Qty:

KIT, 3.5 cm³ FILTERED CAP, 10 µm

KIT, 3.5 cm³ FILTERED CAP, 10 µm

Kit supplied with 5 (ea.) of Item 1, and 1 (ea.) of Items 2 and 3.) Note: To be used in conjunction with the 10 cm³ Multivolume Kit (Mic P/N 133-33605-00). Must be ordered separately.

Item 1) O-RING 1mm x 12mm, BUNA-N DURO 70

Item 2) CAP, FILTERED, 3.5 cm³

Item 3) CUP, SAMPLE 3.5 cm³

Part No. 134-33015-00
Qty:

KIT, 1 cm³ FILTERED CAP,0.5 µm

KIT, 1 cm³ FILTERED CAP, 0.5 µm

(Kit supplied with 5 (ea.) of Item 1, and 1 (ea.) of Items 2, 3, and 4.)

Item 1) O-RING, BUNA-N 7mm ID x 1mm WID

Item 2) Tool, 1 & 0.08 cm³ filter caps, 0.1 cm³ cup

Item 3) CUP, SAMPLE, 1 cm³

Item 4) CAP, FILTERED, 1 cm³ / .08 cm³, 0.5 µm

Required: Must be used in conjunction with the 0.08/1 cm³ Filter Cap Chamber Closure Assembly (Mic P/N 134- 34013-00, see picture right). Must be ordered separately
Part No. 134-33016-00
Qty:

KIT, 1 cm³ FILTERED CAP, 10 µm

KIT, 1 cm³ FILTERED CAP, 10 µm

(Kit supplied with 5 (ea.) of Item 1, and 1 (ea.) of Items 2, 3, and 4.)

Line item 1) O-RING, BUNA-N 7mm ID x 1mm WID

Line item 2) Tool, 1 & 0.08 cm³ filter caps, 0.1 cm³ cup

Line item 3) CUP, 0.08 cm³ FOR FILTER CAP

Line item 4) CAP, FILTERED, 1 cm³ / .08 cm³, 0.5 µm

Required: Must be used in conjunction with the 0.08/1 cm³ Filter Cap Chamber Closure Assembly (Mic P/N 134- 34013-00, see picture below). Must be ordered separately
Part No. 134-33017-00
Qty:

KIT, 0.08 cm³ FILTERED CAP, 0.5 µm

KIT, 0.08 cm³ FILTERED CAP, 0.5 µm

(Kit supplied with 5 (ea.) of Item 1, and 1 (ea.) of Items 2, 3, and 4.)

Line item 1) O-RING, BUNA-N 7mm ID x 1mm WID

Line item 2) Tool, 1 & 0.08 cm³ filter caps, 0.1 cm³ cup

Line item 3) CUP, 0.08 cm³ FOR FILTER CAP

Line item 4) CAP, FILTERED, 1 cm³ / .08 cm³, 0.5 µm

Required: Must be used in conjunction with the 0.08/1 cm³ Filter Cap Chamber Closure Assembly (Mic P/N 134- 34013-00, see picture right). Must be ordered separately.

 

Part No. 134-33018-00
Qty:

KIT, 0.08 cm³ FILTERED CAP, 10 µm

KIT, 0.08 cm³ FILTERED CAP, 10 µm

(Kit supplied with 5 (ea.) of Item 1, and 1 (ea.) of Items 2, 3, and 4.)

Line item 1) O-RING, BUNA-N 7mm ID x 1mm WID

Line item 2) Tool, 1 & 0.08 cm³ filter caps, 0.1 cm³ cup

Line item 3) CUP, 0.08 cm³ FOR FILTER CAP

Line item 4) CAP, FILTERED, 1 cm³ / .08 cm³, 10 µm

Required: Must be used in conjunction with the 0.08/1 cm³ Filter Cap Chamber Closure Assembly (Mic P/N 134- 34013-00, see picture right below). Must be ordered separately.

 

Part No. 134-33019-00
Qty:

Software - Asphalt

Part No. 134-20808-00, Asphalt Software

The 1340 Asphalt Software solution can be closely correlated (>0.15% difference) to results obtained with ASTM Test Method D70-09, and offers an expedited, more robust, operator independent method, with results in minutes

  • Reproducible results in minutes, virtually eliminating operator error 
  • Integral-solution with software for bituminous material testing includes results for specific gravity, volume, and density 
  • Peltier thermoelectric control of AccuPyc II 1340 TEC (Item #1) provides excellent temperature control/stability and sample handling 
  • Disposable sample cups (Item #12) limit cross contamination and minimize cleaning of sample chamber between analyses
Qty:
  Go