Home   >  

Accessories


3Flex Surface Characterization Analyzer

Cables

Part No. 003-63801-01
Cable, Ethernet straight-thru for connnecting instrument to control module (PC)
Qty:

Dewar

Part No. 350-25853-04
Shield assembly for dewar and chemisorption furnace
Qty:
Part No. 350-25825-00
Dewar assembly, 3.2 ltr
Qty:

Dewar lids

Part No. 350-31700-00
for 9mm sample tubes
Qty:
Part No. 350-31701-00
for 12mm sample tubes
Qty:

Gas Regulator

Part No. 004-62230-32
Gas Regulator, CGA 320, 30 psig, for use with CO2
Qty:
Part No. 004-62230-58
Gas Regulator, 30 psig, CGA 580, for use with He, N2, Kr, Ar
Qty:

Gas Regulator Accessories

Part No. 004-25549-00
Reducer, 1/8 in tube x 1/4 in tube (shown)
Qty:
Part No. 004-33601-00
Expansion Kit; adds an additional outlet to the gas regulator
Qty:
Part No. 004-33602-00
Pressure Relief Kit; prevents excessive gas pressure in the event of a regulator failure (not to be used with toxic gases)
Qty:
Part No. 004-25318-00
For Chemisorption
Reducer, 1/4 stub × 1/8 tbg, SST
Qty:
Part No. 201-25818-00
For Chemisorption
Gas Inlet Line, SS 6ft
Qty:

Gas Inlet Lines

Part No. 290-25846-00
Gas Inlet Line, 1/8 in x 6 ft long, copper
Qty:
Part No. 290-25846-01
Gas Inlet Line, 1/8 in x 16 ft long, copper
Qty:

Isothermal Jacket

Part No. 350-25812-02
Isothermal Jacket, 9mm ID
Qty:
Part No. 350-25812-03
Isothermal Jacket, 12mm ID
Qty:

Reference Material

Part No. 004-16844-00
Reference Material, Y Zeolite
Qty:
Part No. 004-16821-00
Reference Material, Silica Alumina, ~ 215 m2/g, 10g
Qty:
Part No. 004-16825-00
For Chemisorption
Reference Material, Platinum on alumina chemi
Qty:

Heating Mantle

Part No. 350-53700-00
Top, Degas mantle top for 350-26000-00 (Glascol mantle)
Qty:
Part No. 350-26004-00
Vapor Heating Mantle
Qty:
Part No. 350-53701-01
Degas Mantle top for 350-53701-00
Qty:
Part No. 350-26012-00
Degas mantle; for use on instruments above serial number 200
Qty:
Part No. 350-33013-00 - KIT, ADAPTER DEGAS HEATING MANTLE
Contains:
Mantle, Degas, 120V AC, 120 W, DB9
CABLE, SUBMINIATURE K MALE TO DB9 FEM
Qty:

Vacuum Pump and accessories

Part No. 004-25509-00
Clamp, NW 10/16
Qty:
Part No. 004-25630-00
Centering Ring, NW 16
Qty:
Part No. 004-28998-02
For Chemisorption
Clamp, Hose, 7/32in - 5/8in
Qty:
Part No. 062-62803-00
Dry Diaphragm Vacuum Forepump without tray
Qty:
Part No. 350-34006-00
Hybrid Pump, 5×10-9 mbar
Qty:
Part No. 062-62803-01 Dry Diaphram Vacuum Forepump (ECR)
without tray, Enhanced Corrosion Resistant (ECR)
Qty:
Part No. 202-25816-60 Hose, Vacuum
Hose, Vacuum NW16 x 60 in.
Qty:

Software and Manuals

Part No. 350-20800-00
3Flex - current version software
Qty:
Part No. 350-42800-00
3Flex - operator’s manual
Qty:

Valves

Part No. 004-22601-06
Diaphragm Sealed Valve, 1/4 in male
Qty:
Part No. 004-62002-05
Solenoid Valve, 24 VDC, 2-way, without BASE
Qty:
Part No. 248-60802-36
Servo Valve cable, .030, SST
Qty:
Part No. 003-22633-01 Valve, Inert, 24V, (ECR)
Chemraz w/o Base with -013 Chemraz o-ring for Enchanced Corrosion Resistance (ECR)
Qty:

Operating Supplies - Physisorption

Part No. 350-33609-00
Extended Operating Supplies, 9mm
Includes 9 sample tubes, 3 isothermal jackets, 1 service kit, reference materials, filler rods, O-rings and other accessories
Qty:
Part No. 350-33610-00
Extended Operating Supplies, 12mm
Includes: 9 sample tubes, 3 isothermal jackets, 1 service kit, reference materials, filler rods, O-rings and other accessories
Qty:

Sample Tubes and accessories

Part No. 004-25013-02

O-ring, -013 70 Duro Viton, Brown

Qty:
Part No. 004-25040-06
Gasket, 1/2 in, SS, Retainer Assembly
Qty:
Part No. 004-25079-10
CHEMISORPTION
O-RING, -009, VITON, BROWN
Qty:
Part No. 004-27070-00
Frit, 20 µm, 1/4 in
Qty:
Part No. 004-32004-00
Rubber stopper for sample tubes (fits various sample tube sizes)
Qty:
Part No. 004-54104-01
16 in Brush, for cleaning sample tubes
Qty:
Part No. 004-54618-00
Tool, for removing the sample port O-ring
Qty:
Part No. 240-14855-00
Rack, sample tube holder
Qty:
Part No. 240-25853-00
Funnel, sample tube
Qty:
Part No. 300-32800-00
Support, sample weighing
Qty:
Part No. 350-25843-01
Ferrule, for 9 mm sample tube
Qty:
Part No. 350-33604-00
Sample Tube Kit, 9 mm; includes 9 O-rings, 9 stoppers, 3 isothermal jackets, 9 ferrules, 1 Dewar lid, 9 sample tubes, 3 hanging filler rods, 1 sample tube brush
Qty:
Part No. 350-61003-00
Hanging Filler Rod for 9 mm sample tube
Qty:
Part No. 350-61002-02
Sample Tube, 9 mm, flat bottom
Qty:
Part No. 350-25843-00
Ferrule, for 12 mm sample tube
Qty:
Part No. 350-25864-00
Check Seal assembly for 12 mm sample tube
Qty:
Part No. 350-33603-00
Sample Tube Kit, 12 mm; includes 9 O-rings, 9 stoppers, 3 isothermal jackets, 1 Dewar lid, 9 sample tubes, 3 hanging filler rods, 1 sample tube brush
Qty:
Part No. 350-33607-00
Check Seal Kit, 12 mm, includes 3 openers, 3 Check Seals, and 1 extractor tool
Qty:
Part No. 350-33608-00
TranSeal Kit, 12 mm
Qty:
Part No. 350-61003-01
Hanging Filler Rod for 12 mm sample tube
Qty:
Part No. 350-61002-03
Sample Tube, 12 mm, flat bottom
Qty:
Part No. 350-61004-00
Filler, Check Seal
Qty:
Part No. 004-25040-05
Gasket, 1/4in, SS, Retainer Assembly
Qty:
Part No. 004-25225-02
For Chemisorption
Ferrule, 6mm, Rear, Stainless
Qty:
Part No. 004-32164-01
For Chemisorption
Quartz Wool, 4in × 6in Bag
Qty:
Part No. 004-32604-08
For Chemisorption
Cap, Plastic, .225D × 5/16, Vinyl
Qty:
Part No. 004-54805-00
For Chemisorption
Tool, Stuffing Extractor
Qty:
Part No. 240-32000-00
For Chemisorption
Stopper, for 1/2in OD tubes
Qty:
Part No. 248-32702-00
For Chemisorption
Filter Disc, Quartz (qty.100)
Qty:
Part No. 350-25874-03
For Chemisorption
Nut, Sample Port, 6mm
Qty:
Part No. 350-25875-00
For Chemisorption
Assembly, Stand, Sample Tube Weighing
Qty:
Part No. 350-33032-00

For Chemisorption
Chemisorption Quartz Filter Discs Kit; includes quartz filter discs(packof100), quartz filter discs instructions, glass rod for filter disc installation

Qty:
Part No. 350-61003-02
For Chemisorption
Assembly Hanging Filler,Quartz
Qty:
Part No. 350-61030-00
For Chemisorption Tube
Sample Flow thru, Quartz, 12mm
Qty:
Part No. 350-61032-00
For Chemisorption Tube
Sample Flow thru, Quartz, 12mm, 6cc,bulb tube
Qty:
Part No. 350-61033-00

For Chemisorption
Glass rod for filter disc installation

Qty:
Part No. 004-25474-00 O-ring, -013 Kalrez
004-25474-00 O-ring, -013 Kalrez, Kalrez 7075 (for chemisorptions and physisorption Enhanced Corrosion Resistance)
Qty:

FlowPrep 060

FlowPrep 060, degasses up to six samples at up to 400 ºC with flowing gas. A gas source and regulator is required.

Link to FlowPrep 060 webpage

Part No. 060-00030-00
FlowPrep 060,
degasses up to six samples at up to 400 ºC with flowing gas. A gas regulator is required.
Qty:
Part No. 060-00035-00
FlowPrep 060 for 3Flex
Qty:

VacPrep 061

VacPrep 061 for 3Flex, degasses up to six samples at up to 400 ºC; uses flowing gas or evacuation by vacuum. Evacuation requires a gas source and gas regulator 065-00035-00.

Link to VacPrep 061 webpage

Part No. 061-00035-00
VacPrep 061 for 3Flex
Qty:

SmartPrep 065

SmartPrep 065
Windows interface allowing programmable ramp and soak rates; degasses up to six samples with flowing gas. This is the recommended degassing unit  because it can be controlled through the software. A gas regulator is required.

 Link to SmartPrep 065 webpage

Part No. 065-00035-00
SmartPrep for 3Flex
Qty:

Pneumatic Filter Assembly

Part No. 350-34040-01
Pneumatic Filter with Regulator
Qty:

Air Compressor

Part No. 011-62700-11
115 VAC 2.12 CFM, for operation of pneumatic valves
Qty:
Part No. 011-62700-23
230 VAC 2.12 CFM, for operation of pneumatic valves
Qty:
Part No. 350-34040-01
Pneumatic filter with regulator
Qty:

Smart VacPrep

Smart VacPrep is an advanced six-port system that utilizes vacuum to prepare samples by heating and evacuation. Each of the ports may be operated independently. Samples may be added or removed from degas ports without disturbing the treatment of other samples undergoing preparation. Degassing automatically terminates when the samples have completed all programmed steps.
Part No. 067-00000-00
without vacuum pump
Qty:
Part No. 067-00000-11
110 volt
Qty:
Part No. 067-00000-22
230 volt
Qty:
Part No. 067-00001-00
with high-vacuum pump
Qty:

Gloves

For Chemisorption
Glove, Cotton Canvas, 8oz
Part No. 004-32187-00
Qty:

Operating Supplies - Chemisorption

These supplies are for the 3Flex with Chemisorption option
Part No. 350-32802-00
Exhaust tube for instrument, 1/4in. ID x 10 ft long
FOR CHEMISORPTION INSTRUMENT
Qty:
Part No. 004-25891-00
Clip, Sample Thermocouple for use with bulb sample tube.
FOR CHEMISORPTION INSTRUMENT
Qty:
Part No. 350-33835-00
Cable, Sample Thermocouple, DB9, Type K
FOR CHEMISORPTION INSTRUMENT
Qty:
Part No. 350-32801-00
Exhaust tube for vacuum pump, 3/8in. ID x 10 ft long
FOR CHEMISORPTION INSTRUMENT
Qty:
Part No. 350-33635-00
Chemisorption Extended Operating Supplies (6-month supply);
includes:  O-rings, sample port dust frit, reference material, furnace insulator set, quartz hanging filler rod assembly, quartz wool, quartz filter discs, sample tube brush, sample tube stoppers, exhaust tubing.
NOTE: Sample tubes are not included in the 3Flex Chemisorption Extended Operating Supplies. Sample tubes must be ordered separately.
Qty:
Part No. 350-33632-00
Chemisorption Extended Operating Supplies (12-month supply);
includes:  O-rings, sample port dust frit, reference material, furnace insulator set, quartz hanging filler rod assembly, quartz wool, quartz filter discs, sample tube brush, sample tube stoppers, exhaust tubing. 
NOTE: Sample tubes are not included in the 3Flex Chemisorption Extended Operating Supplies. Sample tubes must be ordered separately.
Qty:
Part No. 350-31720-00
Furnace Insulator Set
Qty:

Sub-Ambient Temperature Control Devices

Part No. 350-33005-00, ISO Controller

Micromeritics’ ISO Controller utilizes thermoelectric cooling based on the Peltier principle. The unit is designed to maintain a constant temperature between 0 °C and 80 °C when using CO2, N2, and other gases for adsorption analysis. The device rapidly cools and efficiently maintains temperature with minimal electrical current required. The sample area will accommodate up to 3 sample tubes. Heat removal is uniform and accurate when the unit is used with an appropriate liquid (ambient water or liquid antifreeze). The dewar section is placed on the instrument dewar elevator and then raised into position for analysis.
Qty:
Part No. 025-00350-00, Chiller Dewar

Chiller Dewar - A closed plumbing system that circulates fluid from a temperature controlled bath into a small dewar filled with antifreeze in which the sample tubes are immersed.

Qty:
Part No. 025-26002-00, Recirculating Bath
Recirculating Bath, -28 °C, to 200 °C, 230V 50Hz,
Refrigerated and Heating Circulator for temperature control of the Chiller Dewar.

Note: Recommended for use with the Chiller Dewar Option 025-00350-00
Qty:
Part No. 021-00000-00 Model 21 LN2 transfer system

for easy filling of sample Dewars; includes 47-L dewar, mobile platform, and pump with 100-cm discharge line
Qty:
Part No. Cryostat I

Single-Stage Cryogenic Refrigerator Based on the Gifford-McMahon Principle The Micromeritics Cryostat I is a closed-cycle cryocooler based on the Gifford-McMahon (GM) refrigeration principle. It uses helium gas from a helium compressor to generate cryogenic temperatures. The refrigeration effect of the GM cooler results from a series of thermodynamic processes acting on the helium gas that includes: charging and compression, displacement and heat exchange with the regenerator, expansion and heat absorption (cooling effect).

Qty:

Dewar dip stick

Part No. 350-25901-00
Dip stick for checking liquid nitrogen lever in Dewar
Qty:
  Go