Home   >   Product Showcase   >   AccuPyc II 1345 Solutions - High-Pressure

AccuPyc II 1345 Solutions - High-Pressure

The AccuPyc II HP 1345 - High Pressure Density Measurement

The AccuPyc HP features a 100 cm3 sample capacity to determine the true volume and density of solids and powders at high pressures up to 500 psi.

The bundle includes both a Control and Analysis Module and can be operated in either a stand-alone configuration using the internal keypad on the control module, or controlled with a desktop computer. The Control module is cable connected to the analysis module permitting remote analysis if desired.


Reproducibility within +/- 0.04% nominal, full-scale cell chamber volume.


To within 0.1% of reading, plus 0.1% of sample capacity

Additional Features Include:

  • Two separate modules, one for control with keypad the other for analysis. Modules are connected via provided cabling. The AccuPyc II HP 1345 High Pressure Density Measurement
  • Sample chamber can accommodate samples up to 48mm in diameter and up to 60mm in length
  • Guaranteed reproducibility to within 0.04% full scale volume

  • Transducer zeroing, calibration and operation are controlled by internal computer
  • Can be connected directly to analytical balance for transfer of sample mass without transcription error
  • Programmable for automatic repeat measurements or for data acquisition under user-selected tolerances
  • User-programmable number of purges prior to analysis
  • ASCII output from serial port can be captured by computer and used as input to popular spreadsheet programs

    Helium is recommended as analysis gas, but nitrogen or other gases may be used for special applications.