Home   >  

Accessories


AutoChem II 2920

Liquid Nitrogen Transfer System

For easy filling of sample Dewars. Includes 47-L Dewar, dolly, and pump with 100-cm discharge line. Universal electrical input.
Part No. 021-00000-00 Model 021
Model 021
Qty:

Vapor Generator

Part No. 291-33013-00 Vapor Generator; allows a carrier gas to take vapor generated from liquid
Vapor Generator; allows a carrier gas to take vapor generated from liquid
Qty:

Reference Material

Part No. 004-16836-00 Silver Oxide
Silver Oxide
Qty:

Flowmeter

Part No. 290-29800-00 10-cm3 Bubble Burette
10-cm3 Bubble Burette
Qty:

Gas Regulator

Part No. 004-62230-32 CGA 320 fitting, 30 psig (CO2)
CGA 320 fitting, 30 psig (CO2)
Qty:
Part No. 004-62230-35 CGA 350 fitting, 30 psig
CGA 350 fitting, 30 psig (CO, H2)
Qty:
Part No. 004-62230-54 CGA 540 fitting, 30 psig
CGA 540 fitting, 30 psig (O2)
Qty:
Part No. 004-62230-705 Gas pressure regulator, CGA 705 fitting
Gas pressure regulator, CGA 705 fitting (NH3), 30 psig
Qty:
Part No. 004-62230-326 Gas pressure regulator, CGA 326 fitting
Gas pressure regulator, CGA 326 fitting (N2O), 30 psig
Qty:
Part No. 004-33601-00 Expansion kit adds an additional outlet to regulators
Expansion kit adds an additional outlet to regulators
Qty:
Part No. 004-62230-58 CGA 580 fitting, 30 psig
CGA 580 fitting, 30 psig (N2,He, Ar, Kr)
Qty:
Part No. 004-62230-59 CGA 590 fitting, 30 psig (ultrapure air)
CGA 590 fitting, 30 psig (ultrapure air)
Qty:
Part No. 004-62200-58 CGA 580 fitting, 100 psig
CGA 580 fitting, 100 psig (N2, He, Ar, Kr)
Qty:

Gas Inlet Line Assembly

Part No. 290-25846-00 Copper
Copper
Qty:
Part No. 201-25818-00 Stainless Steel, 6 ft.
Stainless Steel, 6 ft.
Qty:
Part No. 201-25818-01 Gas Inlet Line, Stainless Steel, 5m (16 ft.)
Gas Inlet Line, Stainless Steel, 5m (16 ft.)
Qty:
Part No. 290-25846-01 Gas Inlet line, Copper, 5m (16 ft.)
Gas Inlet line, Copper, 5m (16 ft.)
Qty:

Sample Tube

Part No. 291-61702-00 Quartz; for TPD, TPR, and BET analyses
Quartz; for TPD, TPR, and BET analyses
Qty:

Cap / Stopper

Part No. 004-32604-08 Plastic cap, for sample tube exhaust
Plastic cap, for sample tube exhaust
Qty:
Part No. 004-32004-00 Rubber stopper, for sample tube inlet
Rubber stopper, for sample tube inlet
Qty:

Brush

 For cleaning sample tubes
Part No. 930-54603-00 Narrow bristled
Narrow bristled
Qty:
Part No. 004-54609-00 Wide bristled
Wide bristled
Qty:

Funnel

Part No. 240-25853-00 For filling sample tubes
For filling sample tubes
Qty:

Weighing Support

Part No. 280-32800-00 Foam, for supporting sample tubes while weighing
Foam, for supporting sample tubes while weighing
Qty:

Thermocouple

Part No. 291-53904-00 Shaped to enter sample tubes
Shaped to enter sample tubes
Qty:
Part No. 291-61703-00 Sheath, quartz, for sample thermocouple
Sheath, quartz, for sample thermocouple
Qty:

Dewar

Part No. 004-61064-00 600 mL
600 mL
Qty:

Dewar Cover

Part No. 230-31801-00
Qty:

Extraction Tool

Part No. 004-54805-00 For extracting quartz wool from sample tubes
For extracting quartz wool from sample tubes
Qty:

Calibration Syringe

Part No. 004-61602-00 1-mL
1-mL
Qty:
Part No. 004-61604-00 10 mL
10 mL
Qty:
Part No. 004-61604-01 Replacement injection needle for 10-mL syringe, 3
Replacement injection needle for 10-mL syringe, 3
Qty:
Part No. 004-61602-01 Replacement Injection Needle for 0.1 and 1 mL syringes, 3
Replacement Injection Needle for 0.1 and 1 mL syringes, 3
Qty:

Septum

Part No. 004-32602-00 For injection port
For injection port
Qty:

Quartz Wool

Part No. 004-32164-01 4 in. x 6 in. Bag
4 in. x 6 in. Bag
Qty:

Reducer

Part No. 1/8-in. (0.32-cm) compression fitting to 1/4-in (0.64-cm) stem
1/8-in. (0.32-cm) compression fitting to 1/4-in (0.64-cm) stem
Qty:

Port Frit

Part No. 004-27052-00 10 micron, stainless steel, 1/4 in. diameter x 1/16 in. thick
10 micron, stainless steel, 1/4 in. diameter x 1/16 in. thick
Qty:

Ferrule

Part No. 004-25913-00 PEEK, 1/8-in. (0.32 cm³), front and rear set
PEEK, 1/8-in. (0.32 cm³), front and rear set
Qty:
Part No. 004-25912-00 PEEK, 1/16 in. (0.16 cm³), front and rear set
PEEK, 1/16 in. (0.16 cm³), front and rear set
Qty:

Fluid

Part No. 004-16247-00 For gas flowmeter and leak checking
For gas flowmeter and leak checking
Qty:

Tools

Part No. 004-54113-00 Allen wrench, 7/65 in., for frit filter
Allen wrench, 7/65 in., for frit filter
Qty:
Part No. 004-54610-00 Nut driver, 5/32 in., for gas flowmeter
Nut driver, 5/32 in., for gas flowmeter
Qty:
Part No. 004-54010-00 Wrench, open end, 3/8 in. (0.95 cm³) x 7/16 in. (1.11 cm³)
Wrench, open end, 3/8 in. (0.95 cm³) x 7/16 in. (1.11 cm³)
Qty:
Part No. 004-54006-00 Wrench, open end, 5/16 in. (0.79 cm³) x 1/4 in. 0.64 cm³)
Wrench, open end, 5/16 in. (0.79 cm³) x 1/4 in. 0.64 cm³)
Qty:
Part No. 004-54001-00 Wrench, open end, 1/2 in. (1.27 cm³) x 9/16 in. 1.43 cm³)
Wrench, open end, 1/2 in. (1.27 cm³) x 9/16 in. 1.43 cm³)
Qty:

Thermal Conductivity Block

Part No. 292-34013-00 - Detector, Assy, FE-NI-AU, 25.75 OHM
Constant Temperature Filaments 25.75, ±0.75 Ohms @ 70 ±3 °F, Wired
Qty:
Part No. 291-29712-00 Tungsten, gold-plated filaments
Tungsten, gold-plated filaments
Qty:

Delay Line Assembly

Part No. 290-25845-00
Qty:

Gas Sampling Assembly

Part No. 290-25842-00 External
External
Qty:

Heating Mantle

Part No. 003-26018-00 For vapor generator
For vapor generator
Qty:

Furnace Assembly

Part No. 291-53801-00
Qty:

Manual / Software

Part No. 292-42803-00 Operator's manual, AutoChem 2920
Operator's manual, AutoChem 2920
Qty:
Part No. 292-33001-00 Operating software and operator's manual, AutoChem 2920
Operating software and operator's manual, AutoChem 2920
Qty:

Kit

Part No. 291-33600-00 Extended Opeartion Supplies, includes reference material, O-rings, ferrules, dust mask, gloves, Dewar flask, thermocouple, sample tubes, frits, septum, and cold trap cover.
Extended Opeartion Supplies, includes reference material, O-rings, ferrules, dust mask, gloves, Dewar flask, thermocouple, sample tubes, frits, septum, and cold trap cover.
Qty:

Injection Loops

Part No. 290-62600-00 Loop, Sample, 0.5mL
Loop, Sample, 0.5mL
Qty:
Part No. 290-62601-00 Loop, Sample, 1mL
Loop, Sample, 1mL
Qty:
Part No. 290-62602-00 Loop, Sample, 5mL
Loop, Sample, 5mL
Qty:

Analytical Methods in Fine Particle Technology

This book has been prepared to serve those just entering this field of technology as well as experienced researchers seeking insight into particular problems and guidance in achieving the utmost from their testing and research.
Part No. 008-42001-00 Analytical Methods in Fine Particle Technology
Analytical Methods in Fine Particle Technology
by:  Paul A. Webb and Dr. Clyde Orr
Qty:

Flask

Part No. 291-61704-00 50 mL, for vapor generator
50 mL, for vapor generator
Qty:
Part No. 004-25129-00 O-ring, Kalrez, for flask
O-ring, Kalrez, for flask
Qty:

Gloves

Part No. 004-32187-00 Cotton flannel, for handling hot components
Cotton flannel, for handling hot components
Qty:

CryoCooler II

Provides seamless temperature control for fully automated temperature programmed reduction, desorption and reaction analysis. photo shows the CryoCooler with Dewar
Part No. 029-00000-00
Qty:

Kwik Cool

Part No. 291-34005-00 KwikCool; provides rapid cooling of the furnace, decreasing analysis time and increasing throughput
KwikCool; provides rapid cooling of the furnace, decreasing analysis time and increasing throughput
Qty:
Part No. 295-33021-00 Kwikcool Vortex, cool air intended for rapid cooling of the furnace. It is not a temperature control device.
Option, Kwikcool Vortex
supplies cool air intended for rapid cooling of the furnace. It is not a temperature control device.
Qty:

Quartz Filter Disk

Filter Disc, Quartz
100% PURE QUARTZ MICROFIBER FILTER SHEETS.
"pack of 100"
11 mm x 0.43 mm
Part No. 248-32702-00
Qty:

O-rings

Part No. 004-25678-00 O-ring, -009 Kalrez for sample tube outlet side
O-ring, -009 Kalrez for sample tube outlet side
Qty:
Part No. 004-25474-00 O-ring, -013 Kalrez, for sample tube inlet
O-ring, -013 Kalrez, for sample tube inlet
Qty:
Part No. 004-25465-00 O-ring, -010 Kalrez, for sample port
O-ring, -010 Kalrez, for sample port
Qty:

CryoCooler Hose Bracket

The system helps to hold the CryoCooler hose onto the furnace without straining the tube on the furnace
Part No. 160231/00SP
Qty:

Cirrus 2 Mass Spectrometer

Cirrus 3 offers the versatility of state-of-the-art Microvision 2 quadrupole mass spectrometry in a convenient bench-top configuration. Incorporating an Ethernet interface, Cirrus 2 systems may be oper-ated from a local PC or connected directly to an Ethernet network hub or switch for remote operation.  Link to Cirrus 2 webpage
Part No. 292-33015-01 Stand-Alone Unit
Stand alone unit
Qty:
Part No. 292-33640-00 Option, Cirrus 3 200 AMU

200 AMU mass spectrometer connects directly to a dedicated port on the AutoChem II 2920 for detection  and identification of low concentrations of condensable and/or reactive gasses.

Qty:
Part No. 292-46101-00 Training - U.S.A. / Canada
Training - U.S.A. / Canada
Qty:
Part No. 292-46101-00 Training - European Union
Training - European Union
Qty:
Part No. 292-46103-00 Training - China / Asia / All other countries
Training - China / Asia / All other countries
Qty:
Part No. 292-33640-CR Option, Cirrus 3 200 AMU ECR

200 AMU mass spectrometer connects directly to a dedicated port on the AutoChem II 2920 for detection  and identification of low concentrations of condensable and/or reactive gasses.Enhanced Chemical Resistant (ECR)

Qty:

Email Subscriptions

Sign Up Here



Information Security

Privacy Policy