Home   >  

Accessories


ASAP 2050 - Xtended Pressure

Vacuum Pump

Required when using the VacPrep 061. Includes vacuum hose, fittings, oil, and manual.
Part No. 062-00000-11
115V
Qty:
Part No. 062-00000-23
230 V
Qty:
Part No. 004-25630-00
Centering ring
Qty:

Liquid Nitrogen Transfer System

Part No. 021-00000-00

For easy filling of sample Dewars.
Includes 47-L Dewar, dolly, and pump with 100-cm discharge line.
Universal voltage input.

Qty:

Reference Material

Part No. 004-16821-00
Silica-alumina pellets,
surface area ~198 m²/g, 10g
Qty:
Part No. 004-16843-00
Micropore, 10g, ASAP 2020
Qty:

Oil

Part No. 004-16003-01
1 Liter, for vacuum pump
Qty:
Part No. 004-16009-00
Fomblin® YL-VAC 14/6 inert fluid for vacuum pumps that are pre-conditioned for oxygen use.
Qty:

Funnel

Oil Vapor Trap

Part No. 004-25652-00
O-ring, size 217, for oil vapor trap
Qty:
Part No. 062-33002-00
Activated alumina oil vapor trap. Trap only
Qty:

Filter for Pump

Part No. 004-27040-00
For vacuum pump exhaust
Qty:

Activated Alumina Pellets

Part No. 004-16830-00
500 grams, for oil vapor trap
Qty:

Dewar

Part No. 202-25850-00
ASAP 2020: 3 Liter, analysis
Qty:
Part No. 202-25849-00
ASAP 2020: 3 Liter, cold trap
Qty:

Dewar Depth Gauge

Part No. 240-25901-00
Qty:

Dewar Cover

Part No. 202-31707-00
ASAP 2020: Analysis
Qty:
Part No. 202-31708-00
ASAP 2020: Cold trap
Qty:

Grounding Cable

Part No. 003-60809-00
Anti-static, with wrist strap
Qty:

O-Ring BUNA-N

Part No. 004-25006-00
Size 006, for P0 tube
Qty:
Part No. 004-25652-00
Size 217, for oil vapor trap
Qty:

Gas Regulator

Part No. 004-62230-58
CGA 580 fitting (Ar, He, Kr, Nitrogen), 30 psig
Qty:
Part No. 004-62230-35
CGA 350 fitting (CO, Nitrogen), 30 psig
Qty:
Part No. 004-33601-00
Expansion kit: adds additional outlet to gas regulator, includes fittings and instructions.
Qty:
Part No. 004-33602-00
Pressure Relief Kit: prevents excessive gas pressure in event of regulator failure. Not to be used with noxious gases.
Qty:
Part No. 004-62230-32
CGA 320 (CO2) 30 psig
Qty:
Part No. 004-25549-00
Reducer, 1/8 in. tube x 1/4 in. tube, accepts 1/8 in. tube, connects to 1/4 in. swage fittings
Qty:
Part No. 004-62230-54
Gas pressure regulator, CGA 540 fitting (O2), 30 psig
Qty:
Part No. 004-62250-320
Gas pressure regulator, CGA 320 fitting (CO2), 250 psig
Qty:
Part No. 004-62250-350
Gas pressure regulator, CGA 350 fitting (CO, H2), 250 psig
Qty:
Part No. 004-62250-540
Gas pressure regulator, CGA 540 fitting (O2), 250 psig
Qty:
Part No. 004-62250-580
Gas pressure regulator, CGA 580 fitting (He, N2, Ar), 250 psig
Qty:

Sample Tube and Components

Part No. 205-25807-00
Sample tube; Stainless steel, Labeled "C" in diagram
Qty:
Part No. 004-25474-00
O-ring, size 13, Kalrez for sample tube. Labeled "B" in diagram
Qty:
Part No. 300-25824-00
Nut, Sample tube, Labeled "D" in diagram
Qty:
Part No. 240-32000-00
Stopper for sample tube, Labeled "E" in diagram
Qty:
Part No. 205-25815-00
Isothermal jacket, for sample tube. Labeled "F" in diagram
Qty:
Part No. 205-25802-00
Seal frit with built-in check valve for air-sensitive samples. Labeled "A" in diagram
Qty:

Weighing Support

For supporting sample tubes while weighing
Part No. 240-32000-00
For straight wall sample tube
Qty:

Funnel

Part No. 240-25853-00
For filling sample tubes
Qty:

Seal Frit

Part No. 004-54130-00
Tool for seal frit.
Qty:
Part No. 205-25802-00
ASAP 2050 Seal Frit for 1/2 inch Stainless Steel Tubes
Qty:

Sample Tube Rack

Part No. 240-14855-00
For holding sample tubes
Qty:

Sample Tube Brush

Part No. 004-54609-00
For cleaning sample tubes
Qty:

Saturation Pressure Tube

Part No. 200-25840-00
Includes isothermal jacket
Qty:

Heating Mantle with Thermocouple

Part No. 003-26046-00
Mantle, 24V, 120W, Hanging
Qty:
Part No. 230-25808-00
Heating mantle clip
Qty:

Valve Plunger

Part No. 004-25459-00
Kalrez seal
Qty:

Valve Spring

Part No. 004-25936-00
For Kalrez seal plunger, generic spring photo on left
Qty:

Valve Gasket, KEL-F

Part No. 250-25608-00
For analysis manifold valve
Qty:

Plumbing Ferrule - Front

Part No. 004-25103-00
Front, Teflon, for 1/4-in. (0.64-cm) OD tubing
Qty:

Plumbing Ferrule, Rear


Part No. 004-25104-00
Rear Ferrule, Nylon, for 1/4-in. (0.64-cm) OD tubing
Qty:

Rubber Mat, Black

Part No. 202-25821-00
Front shelf, ASAP 2050
Qty:

Gas Inlet Line Assembly

Copper, 1/8 in. Swagelok nut and ferrules (6 feet length)
Part No. 290-25846-00
For ASAP 2020
Qty:

Vapor Option

Part No. 202-33050-00
For ASAP 2020 WATER Vapor studies (picture shown at left)
Qty:

Kits and Options

Part No. 004-62023-01
Service Kit for dry vacuum pump (Vacuubrand); includes replacement diaphragm and seals
Qty:
Part No. 004-62109-01
Service Kit for dry vacuum pump (Pfeiffer); includes replacement diaphragm and seals
Qty:

Analytical Methods in Fine Particle Technology

This book has been prepared to serve those just entering this field of technology as well as experienced researchers seeking insight into particular problems and guidance in achieving the utmost from their testing and research.
Part No. 008-42001-00
Analytical Methods in Fine Particle Technology by: Paul A. Webb and Dr. Clyde Orr
Qty:

Fomblin Vacuum Pump

Fomblin pumps are required for use with oxygen or "oxidizing" gases (nitrous oxide and air among others).

Part No. 062-00002-11

110/120 V

Qty:
Part No. 062-00002-23

220/240V

Qty:

Gas Adsorption Theory Poster

Part No. 200-42901-00
24" x 36"
Qty:

Gas Adsorption Apparatus Poster

Part No. 200-42902-00
24" x 36"
Qty:

FlowPrep 060

The FlowPrep™ 060 applies both heat and a stream of inert gas to the sample. The heat causes contaminants to desorb from the surface and the stream of inert gas sweeps them out of the sample tube. It lets you choose the temperature, gas, and flow rate best suited for your sample material and application. Needle valves allow you to introduce the flowing gas slowly to prevent fluidization of samples.
FlowPrep 060 Web page and Specifications
Part No. 060-00030-00
Qty:

VacPrep 061

The VacPrep™ 061 offers two methods for removing contaminants. In addition to flowing gas, it provides vacuum to prepare samples by heating and evacuation. This combination allows you to choose the preparation method that is best suited to your material or application. The VacPrep features six degassing stations, and a choice of vacuum or gas flow preparation on each of the six stations. Needle valves are also provided allowing you to introduce the flowing gas or vacuum slowly to prevent fluidization of samples.
VacPrep 061  Web page and Specifications
Part No. 061-00030-00
Qty:

LN2 Transfer System

The Model 021 LN2 Transfer System allows you to transfer liquid nitrogen or liquid argon from a nonpressurized storage Dewar into smaller containers as needed in laboratory experiments. The system was specifically developed for conveniently filling Dewars for gas adsorption instruments but also can be used for other cryogen applications. The Model 021 can discharge cryogens at adjustable rates up to 3 liters/min. The roller base makes it easy to move the 021 System to the location where the cryogen is needed. The nozzle and insulated, flexible hose enable convenient filling and refilling of analysis Dewars. The system can hold liquid nitrogen or argon up to 30 days allowing cost-efficient use of your cryogen.
Model 021 Liquid Nitrogen transfer system  Webpage
Part No. 021-00000-00
Qty:

Operators Manual and Software

Operators Manual 2050 XP
Part No. 205-42801-00
Operators manual
Qty:
Part No. 202-33025-00
Isotherm Cycling; allows you to perform up to 500 adsorption/desorption cycles over a user-defined range. Includes software and operating instructions
Qty:
Part No. 205-33001-00
Software package, ASAP 2050; includes current version of software and operators manual.
Qty:

Cold Trap Tubes and Components

Part No. 004-25469-00
O-ring, Buna-N, size 014, for glass or stainless-steel cold trap, Labeled "A" in diagram
Qty:
Part No. 205-25808-00
Nut, for stainless-steel cold trap. Labeled "C" in diagram 
Qty:
Part No. 004-61063-00
Tube, 1/2-in. OD stem, cold trap, glass. Labeled "D" in diagram
Qty:
Part No. 205-25806-00
Tube, 1/2-in OD stem, cold trap, stainless-steel. Labeled "E" in diagram
Qty:
Part No. 300-25824-00
Nut, for glass cold trap. Labeled "B" in diagram
Qty:

Email Subscriptions

Sign Up Here



Information Security

Privacy Policy