|
Gas Supply |
|
| 004-62230-32 |
Gas Pressure Regulator for CO2 |
2 stage gas regulator, CGA 320, delivery pressure range: 2-30 psig |
| 004-62230-35 |
Gas Pressure Regulator for CO and H2 |
2 stage gas regulator, CGA 350, delivery pressure range: 2-30 psig |
| 004-62230-54 |
Gas Pressure Regulator for O2 |
2 stage gas regulator, CGA 540, delivery pressure range: 2-30 psig |
| 004-62230-58 |
Gas Pressure Regulator He, N2, Kr, Ar |
2 stage gas regulator, CGA 580, delivery pressure range: 2-30 psig |
| 004-62230-326 |
Gas Pressure Regulator for N2O |
2 stage gas regulator, CGA 326, delivery pressure range: 2-30 psig |
| 004-62230-705 |
Gas Pressure Regulator for NH3 |
2 stage gas regulator, CGA 705, delivery pressure range: 2-30 psig |
| 004-25549-00 |
Reducer 1/8 in. Tube x 1/4 in. Tube |
|
| 004-25103-00 |
Ferrule, Front, Teflon, 1/4 in. |
For use with 1/8 in. tube × 1/4 in. tube reducer |
| 004-25104-00 |
Ferrule, Rear, Nylon, 1/4 in. |
For use with 1/8 in. tube × 1/4 in. tube reducer |
| 004-33601-00 |
Gas Regulator Expansion Kit |
Adds an additional outlet to the gas regulator |
| 004-33602-00 |
Gas Regulator Pressure Relief Kit |
Prevents excessive gas pressure in the event of a regulator failure (not to be used with toxic gases) |
| 290-25846-00 |
Gas Inlet Line 6' |
For connecting gas to the instrument, Copper, 1/8 in x 6 ft long |
| 290-25846-01 |
Gas Inlet Line 16' |
For connecting gas to the instrument, Copper, 1/8 in x 16 ft long |
| 201-25818-00 |
Gas Inlet Line 6', SS |
For connecting gas to the instrument, Stainless Steel, 1/8 in x 6 ft long |
| 201-25818-01 |
Gas Inlet Line 16', SS |
For connecting gas to the instrument, Stainless Steel, 1/8 in x 16 ft long |
| 004-25913-00 |
1/8 Peek Ferrule Set |
For sealing gas inlet lines into the gas inlet manifold assemblies |
|
Vacuum Supply |
|
| 062-00200-00 |
Dry Vacuum Forepump |
For systems with high-vacuum option, 115/230 VAC |
| 004-62023-01 |
Service Kit Vacuum Forepump |
|
| 062-62801-23 |
Vacuum Oil Pump, 220/240 V |
Replacement pump only, does not include exhaust filter, foreline trap, or vacuum pump tray |
| 062-62801-11 |
Vacuum Oil Pump, 110/120 V |
Replacement pump only, does not include exhaust filter, foreline trap, or vacuum pump tray |
| 062-33002-00 |
Vacuum Foreline Oil Trap |
For one vacuum pump, includes: activated alumina, clamps, o-rings, fittings, and housing |
| 004-25509-00 |
Clamp |
NW 10/16, clamp to connect flex tube to pump or instrument |
| 004-25630-00 |
Centering Ring |
NW 16, sealing ring to connect forepump to instrument |
| 004-25652-00 |
O-Ring for Oil Vapor Trap |
Size 217, Viton |
| 004-16830-00 |
Activated Alumina |
500 g, for oil vapor trap |
| 004-16003-01 |
Vacuum Pump Oil |
1 ltr |
| 004-32177-00 |
Funnel for Filling Vacuum Pump with Oil |
|
| 004-27040-00 |
Vacuum Pump Exhaust Filter |
|
|
Reference Materials |
|
| 004-16843-00 |
Reference Material 13X Zeolite |
Micropore reference material |
| 004-16844-00 |
Reference Material Y Zeolite |
Micropore reference material |
| 004-16821-00 |
Reference Material Silica Alumina |
Reference material for surface area and pore volume, S(BET) appr. 200 m2/g |
| 004-16833-00 |
Reference Material Carbon Black |
Reference material for surface area, S(BET) appr. 30 m2/g |
| 004-16858-00 |
Reference Material Alumina |
Reference material for surface area, S(BET) appr. 5 m2/g |
| 004-16816-00 |
Reference Material Alumina |
Reference material for surface area with Krypton analysis, S(BET) appr. 0.25 m2/g |
|
General Operating Supplies |
|
| 003-63801-01 |
Cable Ethernet Straight-Thru |
For connecting the instrument to a computer |
| 202-25849-00 |
Dewar for Cold Trap |
3 ltr |
| 202-25850-00 |
Dewar for Analysis Port |
3 ltr |
| 202-31707-00 |
Cover Analysis Dewar |
|
| 202-31708-00 |
Cover for Cold Trap Dewar |
|
| 206-14701-00 |
Dewar Shield |
For use on sample port, cold trap, and degas ports |
| 202-14702-00 |
Dewar shield |
For use with Chiller Dewar Option |
| 202-33053-00 |
Stainless Steel Dewar Kit |
4 ltr, wide mouth, includes analysis dewar, cold trap dewar, and elevator adapter. Typically provides greater than 40 hours of unattended analysis. |
| 240-25901-00 |
Dewar Dip Stick |
For checking liquid nitrogen level in Dewar |
| 200-25840-00 |
Saturation Pressure (P0) Tube |
Includes isothermal jacket |
| 004-25006-00 |
O-Ring for P0 Tube |
Size 006, Buna-N |
| 003-26043-00 |
Heating Mantle |
With type K thermocouple, up to 450 °C, 24 V |
| 003-26045-00 |
Heating Mantle |
Side-laced to accommodate monolithic & nonstand sample tubes, with type K thermocouple, up to 450 °C, 24 V |
| 230-25808-00 |
Heating mantle clip |
For monolithic & nonstandard sample tubes |
| 004-61063-00 |
Tube for Cold Trap |
1/2 in. OD stem |
| 004-25469-00 |
O-ring for Cold Trap |
Size 014, Buna-N |
| 200-25979-00 |
Nut for Cold Trap |
|
|
Sample Tubes and Accessories |
|
| 202-33100-06 |
Physisorption Operating Supplies |
Includes: 3 sample tubes (1/2 in.), O-rings, sample port frits, 1/8 Peek ferrule sets |
| 202-33100-12 |
Extended Physisorption Operating Supplies |
Includes: 6 sample tubes (1/2 in.), 1 filler rod, 1 isothermal jacket, 3 sample tube stoppers, O-rings, sample port frits, 1/8 Peek ferrule sets, sample tube brush, dewar cover, reference material |
| 240-61003-00 |
Sample Tube, 1/2 in. |
|
| 240-61002-00 |
Sample Tube, 3/8 in. |
|
| 240-61001-00 |
Sample Tube, 1/4 in. |
|
| 202-25903-00 |
Isothermal Jacket for 1/2 in. Sample Tube |
|
| 202-25902-00 |
Isothermal Jacket for 3/8 in. Sample Tube |
|
| 202-25901-00 |
Isothermal Jacket for 1/4 in. Sample Tube |
|
| 240-61016-00 |
Fillder Rod for 1/2 in. Sample Tube |
|
| 240-61015-00 |
Filler Rod for 3/8 in. Sample Tube |
|
| 240-61014-00 |
Filler Rod for 1/4 in. Sample Tube |
|
| 240-32000-00 |
Stopper for 1/2 in. Sample Tube |
|
| 004-32004-00 |
Stopper for 3/8 in. Sample Ttube |
|
| 004-32604-00 |
Cap (stopper) for 1/4 in. Sample Tube |
|
| 260-25843-00 |
Ferrule for 1/2 in. Sample Tube |
|
| 240-25802-00 |
Ferrule for 3/8 in. Sample Tube |
|
| 240-25803-00 |
Ferrule for 1/4 in. Sample Tube |
|
| 004-25044-00 |
O-Ring for 1/2 in. Sample Tube |
Size 013, Buna-N |
| 004-25022-00 |
O-Ring for 3/8 in. Sample Tube |
Size 012, Buna-N, |
| 004-25466-00 |
O-Ring for 1/4 in. Sample Tube |
Size 010, Buna-N, |
| 260-25890-00 |
Seal Frit for 1/2 in. Sample Tube |
With built-in check valve for air-sensitive samples |
| 260-25891-00 |
Opener for Seal Frit |
Installed in ports to open Seal Frits |
| 004-54130-00 |
Removal Tool for Seal Frit opener |
Tool to install and remove Seal Frit opener |
| 004-54618-00 |
Tool for Removing the Sample Port O-Ring |
|
| 004-27041-00 |
Sample Port Frit |
20 µm, SS, 1/4 in. |
| 004-25466-00 |
O-Ring for Sealing Frit in Sample Port |
Size 010, Buna-N |
| 240-14855-00 |
Sample Tube Holder |
Rack for 12 sample tubes |
| 240-32805-00 |
Support for Sample Tube Weighing |
Sample tube holder for balance |
| 240-25853-00 |
Funnel |
For sample tubes (fits various sample tube sizes) |
| 004-54609-00 |
Brush |
For cleaning sample tube, 330 mm long |
| 300-25824-00 |
Nut for Sample Tube |
|
| 202-33052-00 |
22 mm ID Sample Tube Kit |
Includes 5 sample tubes and accessories, see kit contents below |
| 202-61022-00 |
Sample Tube, 22 mm ID, 25 mm OD |
|
| 202-25904-00 |
Isothermal Jacket for 25 mm Sample Tube |
|
| 202-61022-01 |
Filler Rod for 25 mm Sample Tube |
|
| 004-32230-00 |
Stopper for 25 mm Sample Tube |
|
| 202-25870-00 |
Ferrule for 25 mm Sample Tube |
|
| 004-25609-02 |
O-Ring |
Size 022, Buna-N |
| 202-25868-00 |
Sample Port Fitting for 25 mm Sample Tube |
|
| 202-25869-00 |
Nut for 25 mm Sample Tube |
|
| 202-25871-00 |
Degas Port Fitting for 25 mm Sample Tube |
|
| 202-31709-00 |
Dewar Cover for 25 mm Sample Tube |
|
|
Vapor Option Supplies |
|
| 003-20656-02 |
Cable, M/M 15 Pin D 5 ft straight-thru |
For connecting the controller to the vapor source |
| 003-20656-03 |
Cable, M/M 25 Pin D 5 ft straight-thru |
For connecting the controller to the manifold |
| 004-25103-00 |
Ferrule, Front, Teflon, 1/4 in. |
For sealing the vapor stem assembly to the vapor connector |
| 004-25104-00 |
Ferrule, Rear, Nylon, 1/4 in. |
For sealing the vapor stem assembly to the vapor connector |
| 004-25031-00 |
O-Ring for Replacement on the Vapor Stem Assembly |
Size 110, Kalrez |
| 004-25465-00 |
O-Ring for Replacement on the Vapor Stem Assembly |
Size 010, Kalrez |
| 004-61004-00 |
Dewar Flask |
350 mL |
| 004-61630-00 |
Glass Vapor Tube |
|
| 202-25878-00 |
Sample Port Insulator |
|
| 202-33054-02 |
Sample Tube Conductor Kit |
Contains 2 sample tube conductors and 2 O-Rings |
| 202-34150-02 |
Vapor Stem Assembly |
|
|
Software and Manual |
|
| 202-20828-00 |
ASAP 2020 Plus Physisorption software program |
|
| 202-33027-00 |
MicroActive Software Package, interactive data analysis software |
| 202-42800-00 |
ASAP 2020 Plus Operator Manual (includes binder and dividers) |
|
Temperature Control Devices |
|
| 205-33005-00 |
ISO Controller |
Micromeritics’ ISO Controller utilizes thermoelectric cooling based on the Peltier principle. The unit is designed to maintain a constant temperature between 0 °C and 80 °C when using CO2, N2, and other gases for adsorption analysis. The device rapidly cools and efficiently maintains temperature with minimal electrical current required. The sample area will accommodate up to 3 sample tubes. Heat removal is uniform and accurate when the unit is used with an appropriate liquid (ambient water or liquid antifreeze). The dewar section is placed on the instrument dewar elevator and then raised into position for analysis. |
| 025-00202-00 |
Chiller Dewar |
A closed plumbing system that circulates fluid from a temperature controlled bath into a small Dewar filled with antifreeze in which the sample tubes are immersed. |
| 025-26004-00 |
Recirculating Bath |
Temperature range from -28 °C to 200 °C, 115 V, 60 Hz. Refrigerated and heating circulator for temperature control of the Chiller Dewar. Note: Recommended for use with the Chiller Dewar Option 025-00202-00 |
| 025-33001-00 |
RTD Probe for Recirculating Bath Temperature Control |
Optional RTD mounted in the bath and connected to the controller on the recirculating bath for more accurate temperature control (for use with 025/26004/00). |
| 021-00000-00 |
LN2 transfer system |
For easy filling of sample Dewars; includes 47 L Dewar, mobile platform, and pump with 100 cm discharge line |